Programmer

CH9143 – BLE/UART/USB Three-Way Transceiver

CH9143 is a BLE/UART/USB transceiver (three-way bridge chip) from WCH (Nanjing Qinheng Microelectronics / Jiangsu Qin Heng). It enables transparent data transfer among Bluetooth Low Energy (BLE), USB, and UART interfaces.

  • CH9143 – BLE / UART / USB Three-Way Transceiver
  • CH9143 Features: BLE + UART + USB Bridge Chip
  • WCH CH9143: Bluetooth, USB & Serial Data Bridge
  • CH9143 Datasheet Summary – BLE/UART/USB Transceiver

CH9143 – BLE/UART/USB Three-Way Transceiver

Key Features

  • Multi-interface data transfer: Bidirectional transparent transmission between BLE ↔ USB ↔ UART (any interface can forward data to the others).
  • BLE support:
    • Modes: Slave, Master, and Master-Slave (combined).
    • BLE 4.2.
    • Configurable BLE communication and parameters in slave and master-slave modes.
    • Transmission distance up to ~100 m.
    • 8 adjustable TX power levels.
    • Supports connection from Windows / Linux / Android / iOS hosts.
    • Default broadcast name example (modules): CH9143BLE2U; passthrough service UUID typically 0xFFF0.
  • UART:
    • Max baud rate: 1 Mbps.
    • AT command configuration.
    • Full MODEM signals: RTS, DTR, DCD, RI, DSR, CTS.
    • Data bits: 5/6/7/8; Stop bits: 1/2.
    • Parity: Odd, even, none, space (0), mark (1).
  • USB:
    • Full-speed USB device interface (USB 2.0 compatible).
    • Two driver modes: Vendor driver or installation-free USB-CDC.
    • PC-side USB and BLE virtual serial port drivers provided (compatible with existing serial software/tools; no secondary development needed in most cases).
  • Other:
    • Operating voltage: 2.5 V / 3.3 V.
    • 32 kHz clock source (optional external crystal).
    • Package: QFN28 (4 × 4 mm).
    • Online debug / data monitoring between USB, serial, and BLE.
    • Smart pairing support (with other CH914x devices in certain modes).

Typical Applications

  • MCU/DSP/embedded systems
  • Industrial instruments
  • Smart home devices
  • USB/serial wireless extension
  • Debugging tools, dual-mode (USB + BLE) adapters, multi-interface redundancy

Official datasheet is available from WCH (CH9143DS1.PDF on wch.cn / wch-ic.com). Modules based on it (e.g., WeAct Studio boards) are also common for quick evaluation.

Leave a Reply

Your email address will not be published. Required fields are marked *