Hellobox 8 power Backup firmware with USB

• If there is no front panel LED display when bootup , please follow RS232 upgrade section

Auto upgrade

• Turn off the Hellobox 8 power
• Rename the firmware to auto_burn.fac, and place it in the USB root directory
• Insert the USB into Hellobox 8, and turn on the power
• The box will display “USB” for about 5~10 seconds if the USB is detected correctly, and the upgrade process will start automatically. The panel will show the progress “U0xx”
• When finished, “FFFF” will be displayed.
• REMOVE THE USB AND DELETE THE auto_burn.fac FILE IN USB!!!
• Turn off and turn on the box, it will be back

exceptions:
If step 4 does not work, please try another USB. As known, some USB does not work properly in this case.
If step 6 is forgotten, the box will upgrade again and again.
So remember to remove the “auto_burn.fac“!

RS232 upgrade

This is the last way to recover the box. it requires you to open the box cover and connect the RS232 cable to PC.

• Remove the screws under the box
• Open the box very carefully! The WIFI antenna is connected to the box cover

NEW SOFTWARE WITH ONE YEAR,
New Software 2021 With Green Theme
RECEIVER ORIGINAL DUMP,
New Software With Free One Year Server,
price in pakistan
software download 2022,
new software download,
software 2022,
new software download,
original software,

V5Plus also support this function If you are using some newer version of V5Plus.
How to know if it has or not: check if it displays “boot” or not, no “boot” no this function.
I’d like to notify you, some USB can not be recognized in this auto upgrade, you can try another USB if one does not work

NEW SOFTWARE WITH ONE YEAR, New Software 2021 With Green Theme RECEIVER ORIGINAL DUMP, New Software With Free One Year Server, price in pakistan software download 2022, new software download, software 2022, new software download, original software,