Samsung N8000 firmware

Samsung GT-N8000 Stock Firmware ROM (Flash File)

The Samsung GT-N8000 is a tablet that was released in 2012. If you are looking for the stock firmware (also known as the ROM or firmware flash file) for the GT-N8000, you can try searching on Samsung’s website or contacting Samsung support for assistance. It is also possible to find stock firmware for the GT-N8000 on third-party websites that offer firmware downloads. However, be aware that downloading firmware from third-party sources can be risky, as the firmware may not be official or may have been modified in some way. It is important to make sure you are downloading the correct firmware for your device and to be careful when flashing firmware, as it can cause problems if done incorrectly.

how to install Samsung gt-n8000 firmware upgrade

Samsung GT-N8000

GT-N8000 is a tablet device released in 2012. It features a 10.1-inch display, 1.4 GHz quad-core processor, and runs on the Android 4.0.4 operating system. It also has 1 GB of RAM, 16 GB of internal storage, and a microSD card slot for expansion. It has a 5-megapixel rear camera and a 1.9-megapixel front camera. It is equipped with various connectivity options including WiFi, Bluetooth, and 3G/4G mobile data. The GT-N8000 also has a large battery capacity of 7000 mAh, allowing for extended usage. It is no longer actively supported by Samsung and has been discontinued.

how to install Samsung gt-n8000 firmware upgrade

To install a firmware update on a Samsung GT-N8000 device, follow these steps:

  1. Make sure the device is fully charged and connected to a stable Wi-Fi network.
  2. Go to the “Settings” menu and select “Software update.”
  3. If a firmware update is available, you will see a notification on the screen. Tap “Download and install” to begin the update process.
  4. The device will download the firmware update and install it automatically. This process may take some time, so make sure not to interrupt the process.
  5. Once the firmware update is complete, the device will restart automatically.

It’s important to note that installing a firmware update may delete some data from the device, so it’s a good idea to back up any important data before starting the update process.

Download and extract Odin v3.12.3 ZIP file

More Info

  • Country / Region Singapore
  • PDA N8000XXUDNE5
  • Product Code MM1
  • CSC N8000OLBDNE3
  • Phone N8000DXUDND1

How to root Samsung Galaxy Note 10.1 GT-N8000

Rooting a device involves modifying the operating system of the device to gain access to features and functions that are normally restricted by the manufacturer. Rooting a device can be complex and carries the risk of damaging the device or rendering it inoperable. Therefore, it is important to be cautious and carefully follow instructions when attempting to root a device.

That being said, here are the general steps you can follow to root a Samsung Galaxy Note 10.1 GT-N8000:

  1. Download and install a rooting tool, such as Odin or CF-Auto-Root, on your computer.
  2. Download the firmware for your device and extract the zip file to a folder on your computer.
  3. Boot your device into Download mode by turning it off, then pressing and holding the “Volume Down,” “Home,” and “Power” buttons simultaneously.
  4. Connect your device to your computer using a USB cable.
  5. Run the rooting tool and follow the prompts to root your device.
  6. Wait for the rooting process to complete, then restart your device.

It is important to note that rooting your device may void your warranty and could potentially harm your device. It is also important to carefully follow the instructions provided by the rooting tool you are using and to be sure that you are using a reputable tool. If you are not comfortable with the risks and technical complexity involved in rooting your device, it is generally recommended to leave your device unrooted.

Download and Install Samsung USB Driver on the computer. If in case Samsung USB Drivers are already installed on the computer, then SKIP this step.

Download and extract the root files on the computer. Once the archive is extracted, you will be able to see the following files: