TCL V8-S586T02 (MS6586) Firmware v8-s586t02-lf1v411.bin download
To install firmware on a TCL device using a USB drive, you will need to follow these steps:
- Download the firmware file for your TCL device from the manufacturer’s website or another reliable source. Make sure to choose the correct firmware version for your device.
- Extract the firmware file from the zip archive, if necessary. The firmware file should have a .bin or .img extension.
- Connect a USB drive to your computer and create a new folder on the drive.
- Copy the firmware file to the new folder on the USB drive.
- Disconnect the USB drive from your computer and connect it to your TCL device.
- Power off your TCL device and then power it on while pressing and holding the appropriate key to enter the recovery mode. The key combination may vary depending on your TCL device, so you may need to consult the user manual or online documentation to find out what it is.
- Once your TCL device has entered recovery mode, use the on-screen menu or the physical buttons to navigate to the option for installing firmware from a USB drive.
- Select the firmware file from the USB drive and follow the on-screen instructions to complete the firmware installation process.
| T | Specifications |
| Chassis: | MS6586 |
| Resolution Supported: | 3840×2160 |
| CPU: | Quad-Core |
| CPU Frequency: | GHz |
| GPU: | MALI450 |
| GPU Frequency: | MHz |
| RAM: | GB DDR3 |
| ROM: | 8 GB |
| Operation System: | Smart |
| Audio Output: | 20W |
| Power Supply: | AC 110V-240V 50/60Hz |
| Power Consumption: | 150W |
| Power Consumption: | ﹤0.5W （Standby） |
| Firmware Name: | Update.img |
| Firmware Type: | USB Boot |
| Product User: | TCL, THOMSON, Hitachi. |
Firmware | Download |
How to check the software version of your TCL Android TV
To view the software version of your TCL Android TV, follow the instructions below:
- Press the Home button on the TCL Android TV remote control to display the Home screen.
- Use the navigation button to move the cursor to the Settings
icon, located on the right top of the screen, then press OK - Scroll and select Device Preferences
- Scroll and select About
- This will display the Product Information screen where you will see the software version as shown below.
icon, located on the right top of the screen, then press OK
TCL 55DP648
TCL 55P62US
TCL 55P5CUS
TCL 55P6US
TCL 55P65US
TCL 65EP668
Thomson 55UC63
Thomson 55UD66
Hitachi 55P6US
Hitachi 65P6US
Note: Following the given TCL UHD Smart 40-MS86H1-MAC2HG firmware is USB upgradeable. Kazmi Elecom Team is not responsible for any type of damage/loss as a result of loading/installing the firmware. You should first check the mainboard number then the hardware id then the software version then you can load it. If you are new and do not have enough knowledge of loading or installing software/firmware or dump files then read here first.
How to update the software on your TCL Android TV
Follow the step-by-step instruction on how to update the software on your TCL Android TV:
- Press the Home button on the TCL Android TV remote control to display the Home screen.
- Use the navigation button to move the cursor to the Settings icon, located on the right top of the screen, then press OK
- Scroll and select More Settings
- Scroll and select Device Preferences
- Scroll and select About
- Scroll and select System Update
- The Software Update pop-up box will display, select Network Update
- The TV will search for an available software update, and once prompted, click OK to confirm.
File Upload by: mediafire.com. Easy Download
| SOFTWARE VERSION | File |
|---|---|
| 337 | |
| V8-S586T02-LF1V337 | |
| 371 | |
| V8-S586T02-LF1V371 |
|
| 425 | |
| V8-S586T02-LF1V425 | |
| 628 | |
| V8-S586T02-LF1V628 | |
