OTT
TP.SK105.PB801(N) 1366×768 Firmware Download – Free BIN Dump
tp.sk105.pb801(n) 1366×768.BIN is a firmware (BIN dump) for the TP.SK105.PB801 (or very close variants such as TP.SK105S.PB801 / TP.SK105.PB801(N)) Chinese universal LED TV mainboard.
Mainboard TP.SK105S.PB801 (T) is a Chinese universal 3-in-1 LED TV motherboard (main logic + power supply + LED backlight driver on one PCB).
Key details
| Item | Information |
|---|---|
| Full name | TP.SK105S.PB801 (T) |
| Type | 3-in-1 combo board |
| Common sizes | Mostly 32-inch LED TVs (sometimes 28–40″) |
| Typical resolution | 1366×768 (HD) – most common |
| Flash memory | Usually SPI NOR 8 MB (chips like GD25Q64, XM25QH64, W25Q64) |
| Revision note | The (T) indicates a specific hardware revision of the SK105S.PB801 family |
What this board is
- Type: 3-in-1 combo board (main logic + power supply + LED backlight driver on one PCB).
- Common use: Budget / no-name / Chinese-brand 32–43″ LED TVs (sometimes rebranded as various local names).
- Resolution supported by this file: 1366×768 (HD panels only).
Using an FHD (1920×1080) firmware on an HD panel (or vice versa) usually results in no picture, wrong colors, or a bricked board. - Typical flash: SPI NOR (often 4 MB or 8 MB chips such as 25Q32 / 25Q64 series). Some variants also have eMMC on smarter versions.
About the specific file
- Original name on the download site: tp.sk105.pb801(n) 1366×768.BIN
- Size: ~8 MB
- Source: Hosted on Khan Dish Network (khandishnetwork.net) as a free LED-TV firmware dump.
- It is a raw binary firmware image intended for programming with a USB programmer (CH341A, TL866, etc.) or, in some cases, USB update if the board supports it.
Important warnings before using it
- Match the exact board and panel
Confirm the silkscreen on your board really is TP.SK105.PB801 (or the “(N)” / “S” variant) and that the panel is 1366×768. Wrong panel timing tables = black screen or inverted colors. - Backup first
Always read/dump the original firmware from your board before writing anything new. - Flashing method
- Most reliable: SPI programmer (CH341A / TL866) with the correct chip selected and 3.3 V only.
- Some boards support USB update (file often needs a specific name such as MstarUpgrade.bin or similar and FAT32 USB). Check the board’s service notes.
- Risk
Incorrect firmware, interrupted write, or wrong voltage can brick the board permanently.
Related / similar boards
You will often see firmware listed for:
- TP.SK105S.PB801
- TP.SK108.PB801
- TP.SK105A.PB8xx series
These are related but not identical — do not mix them unless you are certain of compatibility.
If you tell me:
- The exact silkscreen on your board,
- The panel model (sticker on the LCD),
- Whether you have a programmer or want USB method,
Download Link Table – TP.SK105 / SK105S.PB801 Firmware
| # | File Name | Board / Variant | Resolution | Size | Source / Link |
|---|---|---|---|---|---|
| 1 | tp.sk105.pb801(n) 1366×768.BIN | TP.SK105.PB801 (N) | 1366×768 | 8.00 MB | Download here |
| 2 | RANCORE T-32S13 Dump | TP.SK105S.PB801 | 1366×768 (HV320WHB-N56) | 6.42 MB | remont-aud.net (registration required) |
| 3 | MANYA 32MH13B Dump | TP.SK105S.PB801 (T) | 1366×768 (CV320H2-F01) | 5.32 MB | remont-aud.net (registration required) |
| 4 | REGAL LED32TS2 Dump | TP.SK105S.PB801 | 1366×768 (HV320WHB-F56) | 5.34 MB | remont-aud.net (registration required) |
| 5 | MGS M332231 Dump | TP.SK105S.PB801 | 1366×768 | 7.36 MB | remont-aud.net (registration required) |
